Silicone Sealants
A high grade LMN silicone for perimeter sealing of external door and window frames. Rapid curing with good adhesion properties and additional uPVC adhesion promoters.
CE Approved: Conforms to EN15651-1,2; F EXT-INT G 25LM
PRODUCT INFO
For perimeter sealing of external wood, aluminium and uPVC door and window frames and for weather sealing and flexible jointing of infill panels. Can also be used on concrete, plaster and mortar. Note: Not suitable for use with aquaria or for use on bitumen or asphalt. This product cannot be over-painted. Risk of yellowing in low UV light situations (e.g. if used indoors) whilst curing. Note: Sealant may crack if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application.
RETURN & REFUND POLICY
I’m a Return and Refund policy. I’m a great place to let your customers know what to do in case they are dissatisfied with their purchase. Having a straightforward refund or exchange policy is a great way to build trust and reassure your customers that they can buy with confidence.Technical Data
enefits: w Permanently elastic. w Weatherproof. w UV stable colours. w Suitable for alkaline and metal surfaces. w Anti‐fungal. Suitable for use as a perimeter sealant for external door and window frames. It has good adhesion properties with a rapid curing rate. Uses For perimeter sealing of wood, aluminium and PVCu door and window frames and for weather sealing and flexible jointing of infill panels. For building and construction joints and joints between different materials with high movement. Preparation Ensure all surfaces are clean, dry and free from grease or any contaminants that may hinder adhesion. For best results on movement joints, Bond It EXPANDING FOAM is recommended as a backing material, or a suitable backing tape or rod. Application All surfaces must be clean, dry and dust and grease-free. Porous materials should be primed for optimum adhesion. When sealing deep joints use foam backer rods to minimise wastage. Cut the tip of the cartridge, screw on nozzle and cut at an angle of 45o . Apply at temperatures between +5o C and +45o C using a standard sealant gun. Tool the sealant using the appropriate shaped tooling aid, such as a SEALANT APPLICATOR TOOL - DO NOT USE A WETTED FINGER. Note: Sealant may tear if exposed to movement before it is suitably cured, therefore joints should be protected from movement for at least 3 hours after application. Maintenance Resistant to all common household cleaning chemicals. In showers and bathrooms best results are obtained with a weekly clean to prevent organic build up. Stains can be removed with commercial bleach. Provide regular and sufficient ventilation in closed rooms. Limitations Porous surfaces should be primed first. Do not use on surfaces where water can penetrate through porous materials to the bond interface without first carrying out remedial work. Not suitable for use on natural stone. Not suitable for use with aquaria. Not suitable for use on bitumen or asphalt. Over-painting is not recommended. Risk of yellowing in low UV light situations. Cleaning Of Tools Use Bond It WHITE SPIRIT or MULTI-WIPES. Colours See reverse for available colour and size options. Container Size EU3, EU4 plastic cartridges and 600ml foil in white. Shelf Life 12 months from date of manufacture when stored in unopened cartridges. Storage Conditions Store in cool, dry conditions at a temperature between +5 and +25o C. Disposal of Containers Do not leave empty containers where residue could be harmful to children, animals or the environment. Remove any containers to a central disposal point in accordance with local regulations. Health & Safety Contains 2‐Butanone oxime (MEKO). Please refer to separate material safety data sheet for full handling, use and storage instructions. Keep out of reach of children. It is the users responsibility to determine suitability for use. If in doubt contact our Technical Department for advice. Note: this information is for general guidance only, since site conditions and labour are beyond our control. It is recommended that users make their own tests to determine suitability. Never compromise on quality! D